1.簾線輸水膠管
用途:
供采礦、工廠、農林、土木建筑工程常溫下輸送水及一般中性液體。
特點:
膠管管體輕便,具有良好的柔軟性和耐老化性能,膠管的爆破壓力不低于
工作壓力的三倍。
1.Cord Water Transprtation Rubber Hose
Applicability:Apply to transport water and some neutral liquid in mining,factories,farming,civil
engineering etc.
Character:The body is hard,light and convenient with excellent flexibility and anti aging.The burstre
pressure is at least three times of the working pressure.
2.吸水管
用途:
供工礦、土建及水利工程等吸引常溫水及一般中性液體。
特點:
膠管管體有優良的曲撓性,管體堅固,在承受真空度-80KPa(600mm汞柱)的條件下使用時膠管仍
有良好的性能。
2.Water Suction Rubber Hose
Applicability:Apply to suck water and some neutral liquid in mining,civil engineering and water
conservancy projrct etc.
Character:The body is good in flexibility and can perform well under -80KPa(600mm mercury) in a
vacuum.
3.排吸水膠管
用途:
供工礦、工廠、城建及水利工程等吸引或排送常溫水及一般中性液體。
特點:
膠管具有承受正壓或負壓的雙重性能,適于較復雜環境條件下使用。
3.Water Discharge and Suction Rubber Hose
Applicability:Apply to discharge and suck water and some neutral liquid in mining,factories urban
construction and water conservancy project etc.
Character:The hose is suitable for more complex conditions with double properties of bearing positive
and negative pressure.
4.高壓吸水膠管
用途:
適合基礎工程大揚程水泵排水用。
特點:
膠管承壓高,變形小,具有很高的抗拉強度,膠層抗撕裂,耐磨耗,耐老化,性能優良。膠管的爆破
壓力不低于工作壓力的三倍。
4.High Pressure Water Suction Hose
Applicability:Apply to discharge water for the long distant water pump in foundation engineering.
Character:The hose can bear high pressure with excellent properties of high tensile strength,anti aging
and wear proof.The burst pressure is at least three times of the working pressure.
1、簾線輸水膠管主要參數
| 
				內徑 in.mm I.D  | 
			
				工作壓力 Mpa(psi) W.P  | 
			
				基本長度 Basic Length  | 
			
				長度 Max Length  | 
		|||
| 
				公稱尺寸 Size  | 
			
				公差 Tolerance  | 
			Mpa | Kgf/cm2 | m | 
				公差 mm Tolerance  | 
			m | 
| 13 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 16 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 19 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 22 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 25 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 | 
| 32 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 38 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 45 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 51 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 | 
| 64 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 | 
| 76 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 | 
| 89 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 | 
| 102 | ±2.0 | 0.7 | 7 | 20 | ±200 | 200 | 
| 127 | ±2.0 | 0.7 | 7 | 10 | ±120 | 10 | 
| 152 | ±2.0 | 0.7 | 7 | 10 | ±120 | 10 | 
2、吸水膠管主要參數
| 
				內徑 in.mm I.D  | 
			
				基本長度 Basic Length  | 
		||
| 
				公稱尺寸 Size  | 
			
				公差 Tolerance  | 
			m | 
				公差 mm Tolerance  | 
		
| 25 | ±0.8 | 20 | ±120 | 
| 32 | ±1.2 | 20 | ±120 | 
| 38 | ±1.2 | 20 | ±120 | 
| 45 | ±1.2 | 20 | ±120 | 
| 51 | ±1.2 | 20 | ±120 | 
| 64 | ±1.5 | 20 | ±120 | 
| 76 | ±1.5 | 20 | ±120 | 
| 89 | ±1.5 | 20 | ±120 | 
| 102 | ±1.5 | 20 | ±120 | 
| 127 | ±2.0 | 10 | ±120 | 
| 152 | ±2.0 | 10 | ±120 | 
| 203 | ±2.5 | 10 | ±120 | 
| 254 | ±2.5 | 10 | ±120 | 
| 305 | ±3.0 | 10 | ±120 | 
| 357 | ±3.0 | 10 | ±120 | 
3、排吸水膠管主要參數
| 
				內徑 in.mm I.D  | 
			
				工作壓力 Mpa(psi) W.P  | 
			
				基本長度 Basic Length  | 
		|||
| 
				公稱尺寸 Size  | 
			
				公差 Tolerance  | 
			Mpa | Kgf/cm2 | m | 
				公差 mm Tolerance  | 
		
| 51 | ±1.2 | 0.6 | 6 | 20 | ±120 | 
| 64 | ±1.5 | 0.6 | 6 | 20 | ±120 | 
| 76 | ±1.5 | 0.6 | 6 | 20 | ±120 | 
| 89 | ±1.5 | 0.6 | 6 | 20 | ±120 | 
| 102 | ±2.0 | 0.6 | 6 | 20 | ±120 | 
| 127 | ±2.0 | 0.6 | 6 | 10 | ±120 | 
| 152 | ±2.0 | 0.6 | 6 | 10 | ±120 | 
| 203 | ±2.5 | 0.6 | 6 | 10 | ±120 | 
| 254 | ±2.5 | 0.6 | 6 | 10 | ±120 | 
4、高壓吸水膠管主要參數
| 
				內徑 in.mm I.D  | 
			
				工作壓力 Mpa(psi) W.P  | 
			
				基本長度 Basic Length  | 
		|||
| 
				公稱尺寸 Size  | 
			
				公差 Tolerance  | 
			Mpa | Kgf/cm2 | m | 
				公差 mm Tolerance  | 
		
| 76 | ±1.5 | 0.9 | 9 | 20 | ±120 | 
| 89 | ±1.5 | 0.9 | 9 | 20 | ±120 | 
| 102 | ±2.0 | 0.9 | 9 | 20 | ±120 | 
| 127 | ±2.0 | 0.9 | 9 | 10 | ±120 | 
| 152 | ±2.0 | 0.9 | 9 | 10 | ±120 | 
| 203 | ±2.5 | 0.9 | 9 | 10 | ±120 |